It's the BIG 50!

During March, we have several birthdays to celebrate.  One of special significance is to mark my oldest son's half-century birthday...the BIG FIVE-O!  Yes, his 50th birthday.  His fiancé, oldest sister, and I got together to make a day-long adventure out of preparing for the BIG party.  We shopped for many, many balloons...rubber ones in black, metallic gold, white, and clear confetti and Mylar ones in black & brightly colored splatters with CELEBRATE and candles featured, gold 5-0 numbers, plus metallic stars in black, gold, and white!  We bought party supplies for the cake and eating, and LOTS of food.  On the menu was BBQ'd pulled pork sandwiches, coleslaw, homemade baked beans, pasta salad, and beverages!  It was a wonderful day full of fun and laughter and the weather even cooperated with a sunny, balmy 53 degrees.  We were able to play outside with a little help from two patio heaters and some warm sweaters!

To help celebrate this noteworthy halfway mark, I needed a card.  I have long contemplated a woodgrain card using some SU companion papers that I bought back in 2017, Wood Textures. Somehow, I just have never got around to opening the package and making the wonderful masculine patterns into a card. This was the time and the event to make good on this card idea that has been lurking in the recesses of my mind for over five years!  Take a peek below at the completed results both inside and out.  I think David will be thrilled with its final outcome!

Ingredients-- Papers: Cardstock--SU-Basic Black, Copper Foil. Kraft-paper bag recycled. Patterned Paper--SU-Wood Textures (2017-2019). SU Stamps--Picture Perfect Birthday. SU Dies--Seasonal Layers (Scrap stash copper leaves--smaller modified from larger). SU-Embossing Powder/ Black. Colorbox-Chestnut Roan (Ink Distress-Edges). Fold--Front Flap Overlay Fold.  Size--4-3/4 x 6-inches.

A Son-In-Law "Born to Ride" Motorcycle Birthday!

My daughter, Michele's husband has a birthday in July.  One of his big-time hobbies is riding his big, black Harley Davidson motorcycle whenever the weather is ready for him to meet the road.  I wanted to use my new Stampin' Up stamp, One Wild Ride, especially for his birthday, because there is an excellent vintage-looking, big, black motorcycle in this stamp set, in addition to great sentiments, such as the one I chose, Born to Ride.

Ingredients:  Darice cardstocks: Midnight Black; Kraft.  Darice Core-dinations: Patterned Cardstock-Neutrals.  DCWV Stacks: Foil/ Gold; Glitter Cardstock/ Black.  Darice Embossing Folder: Diamonds.  Ink: Memento Tuxedo Black; Versamark Watermark.   Stampin' Up products: Stamps--Born to Ride; Die--Sunburst Thinlit; Clear Embossing Powder.  EK CardCreator Corner Punch: Basketweave.  May Arts: Jute Fine Twine.  Kaiser Pearls: Black.  Computer-made verse.  Technique: Fussy-Cutting.  Size: 5" x 6".

The Card Assembly Story

My first step was to cut a 10" by 6" piece of black cardstock and crease and fold in half to form a tent-style cardbase.  Next, I cut a piece of gold foil 4-3/4" x 5-3/4" and texture-embossed it using the Darice Diamonds embossing folder.  This embossed gold foil was then adhered to the black cardbase, and set aside.

My second process was to die-cut two Sunburst designs. . .one in the Kraft patterned paper and one in the Black Glitter paper.  Instead of sitting them evenly on top of one another, I twisted them just slightly to allow the black glitter paper to peek out just under the edge of the pattern about 1/8-inch and adhered them together while in this "twisted fashion."  The edges of the rays will be uneven at this point, and and will need to be trimmed straight to the size you desire.  Mine are cut to 4" x 4-3/8" and trimmed so that the rays are as closely centered as possible.  I then cut a piece of gold foil the same size and adhered it to to the sunbursts to become their underlying mat, and now the gold foil shows through as rays as well.  I then cut a piece of black cardstock mat 4-1/4" x 4-3/4" and adhere it as the base mat for my sunburst set of papers.  This sunburst set was then popped up off the cardbase mats already prepared and adhered together in the first step above.

I wanted my vintage motorcycle to be black embossed, but I found with so much black in the image, it became muddied and unclear.  Following is what I found I could do to achieve a black embossed motorcycle using my MISTI stamping tool. 

First, I place my cardstock in the MISTI and aligned and mounted the motorcycle stamp onto my MISTI all according to the tool's directions and then inked up the stamp with Memento Black Ink.  I found that I needed to re-ink and repeat stamping the image at least three times to get a rich, black impression.  Second, while leaving my stamp adhered perfectly on my MISTI where originally placed, I cleaned off the black ink.  Next, I inked up the stamp with Versamark Watermark Ink and re-stamped over my image, repeating inking and stamping two times with the Versamark.  

The last step to finish the card front was to heat emboss the motorcycle by applying clear embossing powder to the wet Versamark ink and dusting off cleanly before heating.  I applied this same process to the "Born to Ride" sentiment.  After applying my twine, and I fussy-cut both the motorcycle and the sentiment, and popped them up off card front.

My final step, as is my cardmaking tradition, was to create an inside design and birthday verse that complimented the card front and the occasion for which it is to be given.  My verse was completed using my computer and printer.  I think Don will be very pleased with his motorcycle card!