Valentine Dots & Hugs for Friends!

I'm going to a Stampin' Up cardmaking event in the next week, and I wanted to make some Valentines cards for the two ladies our hostesses.  This was especially since I was unable to get my Christmas cards finished and mailed due to hand and bone issues where I was forced to wear thumb braces 24-7 to help try to get the pain and swelling under control.  I am now down to several hours a day without the braces, so I will take advantage of that time for cardmaking, and hope I do not find myself right back to the same issues all over again.  Meanwhile, a cortisone shot in my left thumb joint has helped considerably, which is my worst hand.

Moving on. . .  I decided to use the Basket Weave Edging (aka Braided Edge/ Lattice Edge) technique, which is fun to do and gives such an amazing look of added elegance to a card...at least in my humble opinion.  I want to enter my card into the Splitcoaststamper Alphabet Challenge for Letter D for DOTS, using a dot embossing folder to feature dots on my card, which also inspired my blog title, Valentine Dots & Hugs for Friends!

I also looked into other possible challenges to enter as well before beginning.  I was inspired to branch out in that I am not creating a card in the traditional Valentine colors of black, red, pink, or white.  Mine is to be sapphire blue, medium pink, and yellow and sports a peek-a-book washi tape heart.  I was inspired by the Inspiration Challenge Spoonflower website for my colors and the Ways to Use It for my peek-a-boo heart.

I created a peek-a-book heart window and used an embossing folder on the card front to create some dimension.  I threw in a little washi tape for added interest in the peek-a-book heart and the "hugs" die-cut sentiment!  Take a look below at my finished card; I made two identical cards for my hostess friends.  I'm sorry to say that I forgot to take a picture at the card interior designs with their personalized computer verse before I gave them away, so I am unable to share that with you.

Ingredients:  Cardstocks:  Stampin'Up--Whisper White, Pretty in Pink (retired); Recollections Cape Cod Blue pack (sapphire blue shade).  Stamps: Happy Day (flower center punched out).  Ink: Melon Mambo.  Dies:  Technique Tuesday--Di Heart Hugs.  Punches:  SU retired: Full Heart, Boho Blossom (medium flower); EK Medium Victorian Corner punch.  SU Embossing Folder: Perfect Polka Dots (retired).  SU Washi Tape: Gingham Garden (2012-13 annual catalog).  SU Ribbon: 3/8" Pretty-in Pink Stitched Grosgrain (retired).  Wink of Stella-Clear.  Rhinestones.  Basket Weave Technique (aka Braided or Lattice Edge).  Size:  4-1/2" x 5-3/4."      

Christmas Shoebox Fun - Braided-Edge Technique!!

I have recently met a couple of ladies who live in my area, who are active Splitcoaststamper fans. . .one is actually a hostess for the "Ways to Use It" weekly challenge.  After getting together for a meet and greet coffee and cardmaking fun, we decided to try and meet at least once a month.  For our November get-together, we decided to do a "Teach-a-Technique Christmas Shoebox Exchange," but unfortunately, life got in the way, and we had to cancel November and re-schedule for early December. 

We will each make a sample Christmas card that features a technique the others have not tried.  We will take a plastic "shoebox" full enough materials and the tools needed for the others to make our particular sample technique card.  It's so nice to meet and get to know others who enjoy the same hobby that I do.   It should be a fun day!

The technique I decided to teach with my Christmas card is the Braided Edge, aka Basket Weave, aka Lattice Edge.  Thankfully, neither of the other two ladies have used this technique before...it will be something new and exciting!  My card will also feature the peek-a-book technique, though they have probably used this idea previously.  I chose Whisper White, Soft Sky, Wild Wasabi, Garden Green, and Night of Navy for my card's color combination.  I'm looking for a soft, peaceful look when my card is done.  Take a peek at my finished braided-edge technique card and the inside verse designs below.  I think I achieved my goal of a soft and peaceful-looking card.  I've made two identical cards and they will be perfect for my two cardmaking buddies when we have our annual Christmas luncheon!

Ingredients: Stampin' Up Products:  Cardstocks--Whisper White, Soft Sky.  Darice Core'denations Opulent Opal.  Stamps--Lovely As a Tree, More Merry Messages (sentiment), Joyful Christmas (inside verse)  It's A Celebration (mini snowflakes).  Ink--Pool Party (sponging), Wild Wasabi & Garden Green (trees), Night of Navy (sentiment/ verse), White Craft (snowflakes).  Dies--Festive Flurry (largest).  White Mica Flakes.  Other products:  Dies--Lifestyles Scalloped Ovals.  Embossing Folder--Darice Snowflakes.  Punches:  Martha Stewart--Corner Rounder.  Recollections--Mini Snowflake (colored with Copic marker).  Sequins--Pink Posh.  Ribbon--stash.  Technique: Braided-Edge, aka Basket Weave/ Lattice Edge. Size: 4-3/4" x 6-1/4".

Making the Card

To make my card, I measured and cut all my cardstock pieces to fit my 4-3/4" x 6-1/4" finished card size.  Cut the cardstock pieces as follows:  Whisper White Cardbase: 6-1/4" x 9-1/2" with the long side 4-3/4" scored for the fold; Soft Sky Layer = 3-7/8" x 6-1/4"; Opulent Opal Glitter Top Layer = 3-1/2" x 6"; Opulent Opal Glitter Sentiment Underlayer = 1-1.2" x 3-1/2"; Whisper White Tree Stamp Layer = 3-1/4" x 5"; Whisper White Sentiment Stamped Layer = 1-1/2" x 3-1/2."  

Next steps are to Prepare Paper Pieces and Assemble, as follows:  1) Complete the Braided Edge (aka Basket Weave) technique to the fold side of the card.  Here is a YouTube link with a tutorial:  https://youtu.be/3LEU7Hzgb2I that will show you how.

2) Adhere the Soft Sky layer to the cardbase with the top, right, and bottom sites fitting exactly to the cardbase edges and the left side butted against the braid cuts (see picture); set aside.  

3) Die-cut Opal Glitter paper with the largest Festive Flurry snowflake die.  The die is offset to the right over the edge of the card.  Make sure the largest snowflake cutout is exactly vertical from top to bottom about 3/8" below the top edge of the card and position to allow for the dark green stamped tree to be vertically centered in the snowflake's cutout area (see picture).  

4) After die-cutting, emboss the Opal Glitter paper with a snowflake embossing folder, using your Big Shot.  Since my embossing folder was about one-inch shorter than my Opal Glitter paper, after running it through once, I re-positioned the unembossed edge only back into the folder and ran it through the Big Shop only until that part hit under the rollers and then backed it back out so that the paper would not be marked with a line where the folder ended.  To achieve a good looking embossing pattern, I was very particular about how the pattern lay on my first past in order to be able to re-position my paper to fill in the blank area with snowflakes.  I have a Big Shop Plus, so I was able to turn my embossing folder sideways to find a pattern I like for the second pass.  

5) With Pool Party ink, sponge the surface of the 3-1/4" x 5" white cardstock before stamping on the trees in the area that will peek through the Festive Flurry die-cut  (see picture).  

6) Position and stamp trees onto sponged piece, as follows: Stamp-off once, the side trees first, using Wild Wasabi ink (see picture).  Position the trees so that they will fit in the die-cut snowflake opening and be slightly shorter than the darker green center tree.  Lay the die-cut Opal Glitter piece over to get an idea where each tree should be positioned.  There are two trees on each side of the dark green middle tree.  

7) Position and stamp the middle tree, using Garden Green ink (do not stamp-off this tree.  

8)  Stamp mini snowflakes on the sky around and above the tree tops, using White Craft ink.  

9) Apply Mica Flakes, as follows:  Dot the snowflakes with quick-dry glue in the areas that will peek through the snowflake open window.  (Stampin' Up Two-Way Glue Pen works well.)  Also glue dot any other areas of the trees that you want it to look like snow has fallen.  Liberally sprinkle white mica flakes over all glue dotted area.  Tap off card; repeat steps and re-apply more flakes where needed (see picture) until you get the look you'd like.  

10) Adhere die-cut Opal Glitter layer over trees, positioning to allow the Soft Sky layer to show all around evenly.  

11) Sentiment:  Sponge surface of small piece of Whisper White cardstock with Pool Party ink; stamp sentiment over sponging when dry, using Night of Navy ink; die-cut with scalloped oval die. 

12) Sentiment Under-layer: die-cut, with same scalloped oval die, from small piece of Opulent Opal Glitter paper; cut in half and trim edge in curve so that sharp cut edges will not show; adhere sentiment oval onto Opulent Opal scalloped oval halves so that the under-layer peeks out at each end and around top and sides (see picture); pop it up centered horizontally at base of middle tree trunk (see picture).  

13) Ribbon bow:  using a 3/8" wide ribbon, tie a small bow and using Glue Dots, adhere it to the upper left where braid and Soft Sky meet (see picture).

Another Two-Technique Easter Card!

Well, I guess you can tell I was being truthful when I said I was enamored in my last card post. . .so I had to try one more Easter card using the Dahlia-Fold Cross and the Braided Edge (aka Basket Weave, aka Lattice Edge.  This one I'm making in purple because my daughter-in-law loves all things purple.

I tried some lace to set off my cross, and I even colored it with Copic markers so that it matches my patterned paper more closely.  I like the lace, but I've decided I would have liked the end result better if it was not so wide.  My previous card used a 7/8" ribbon, and I've decided this horizontal ribbon or lace should not be wider than one inch.

Another thing I learned on the Braided Edge, is that if the "V" that you cut off the bottom is not long enough reach the top edge of your card when it is re-positioned to the top and also have its point buried the same depth as all of the others in the braid, you can cut a longer one from cardstock by:

• Cut a 2" x 3" rectangle of white cardstock.

• Score it vertically in the center down its 2" height.

• Fold on the score line.  Note: The remaining instruction are carried out with rectangle folded on the score line.

• With the scored fold on your left, measure at the top over 1 inch.

• With pencil, lightly draw a diagonal line from the tip of the fold at the bottom of the fold up to this 1 inch mark.

• At the top, measure to the left from the pencil line over 3/8" and mark with a dot.

• From this dot, lightly draw another line to the fold.  The two lines drawn should be exactly parallel and 3/8" apart.

• Cut along both lines to form your new "V" for the top of your card braid.  Note: Erase all pencil markings. 

I admit, I'm a perfectionist so it bothered me that this top "V" did not exactly match all the others in the depth of its "V" point and its legs did not reach the top edge of my card perfectly.  I think this may be a problem if you like your cards to be larger than the standard 4-1/4" x 5-1/2" A2 card size, as the template was designed for this that standard sized card.  Below is my finished card:

And the final step is now complete. . .finishing off the inside of the card with coordinating embellishments and a verse to please!

Recipe:  Stampin' Up Products: Cardstocks--Whisper White, Perfect Plum; Pattern--2013-2015 Regals DSP Stack/ Perfect Plum (retired).  Stamps--Delightful Dozen (retired), Indescribable Gift (2016 Occasions).  Ink--Perfect Plum + Memento: Tuxedo Black.  Punch: 2" Circle, 2-1/2" Circle, Curvy Corners (inside).  Sizzlit Die: Lots of Tags (retired).  Something Borrowed Rhinestone Embellishment (retired).  Stash:  1-5/8" Lavender Lace, 5/8" Variegated Sheer, Flower Rhinestones (inside).  Techniques:  Braided-Edge (aka Basket Weave); Dahlia-Fold.  Size: 5-1/16" x 5-7/8". 

Two Techniques in One for Easter!

I think I'm enamored!  I just had to try another Dahlia-fold cross, plus another technique I learned this month. . .the Braided Edge (aka Basket Weave; aka Lattice Edge), and I rolled them both into the same Easter card.  I have decided to enter this card into the 2 Cute Ink Digital Stamps Challenge Blog.  Jump on over and take a look at all the wonderful cards that have entered this month's March Challenge:  http://2cuteinkchallenges.blogspot.com/2016/03/challenge-133-easter-theme-new-digital.html

My cross on this card is more like a Greek Cross with all arms of equal length, rather than the more familiar Latin Cross with the descending arm longer.  The Latin Cross is also known as the Western Cross and represents the cross of Christ's crucifixion.  I forgot that we punched a 2-1/2" Circle for the descending arm of the cross and three 2" Circles for the top and side arms of the cross.  My circles are all 2" Circles, thus ending up with a Greek Cross.  With this little circle size change, it had my wondering why I had so much more room at the bottom to add a sentiment, but after reviewing my first cross card, I realized what I had done differently.  Oh well, there is never a mistake in cardmaking just a little creative deviation!

Below is a tutorial I found on Pinterest by Francine Davis on how to make the Dahlia folds for each petal.  A Dahlia-Fold flower uses eight 1-1/4" to 1-1/2" circle punched petals, depending on how large you want your flower.  The size of the circle determines the size of your flower. . .smaller or larger.  It's usually easier to assemble your petals into a flower if you cut a ninth circle to adhere them to.  A cross uses only four punched circles.  The Latin Cross (the traditional cross style) uses one - 2-1/2" Circle for the longer descending arm and three - 2" Circles for the top and cross arms.  A Greek Cross, as in my card below, uses four - 2" circles as all arms are of equal length.

Dahlia-Fold Petals Mini Tutorial

Next I moved on to prepare my braided-edge card base.  Below is a link to a pdf file of the pattern template used for my card.  There are actually seven patterns on this sample template, which can be printed out on 8-1/2" x 11" printer paper:

http://stampingimperfection.com/wp-content/uploads/2014/05/braid-template.pdf

Next is a video link that shows step by step how to prepare and make your braided edge:  http://stampingimperfection.com/braided-card-tutorial-template/

After I completed the braided-edge on my card base, I prepared by card front panel by embossing it with Stampin' Up's Elegant Dots folder, and then I added a horizontal ribbon band to act as a base for my Dahlia-Fold cross, burying the raw edges of the ribbon to the back of my card panel.  This panel was then adhered to my braided-edge card base.  

I wanted even more embellishing, so I added a ribbon tie at the base of my braided weave, tying it through the weave.  Next, I added a folded liner to the inside of my card to coordinate with my cross color and contrast with the white card front.  I made my liner large enough that it also peaks out around the card edges to add even a bit more color.  This liner is purely optional as the card is equally pretty with an open braided effect as well.  

To finish my card, I added a layered Easter sentiment and a fancy pearl embellishment to the middle of my cross.  If this embellishment were a brad, it would need to be attached prior to adhering the card front panel to the card base in order to bury the brad prongs.  Take a peek below at my second Dahlia-Fold Cross where I branched out and applied even more creative ideas.

Below you will find the finished inside of my card with a little embellishing to coordinate with the front design and a lovely verse from Stampin' Up's Suite of Sayings.

Recipe:  Stampin' Up Products: Cardstocks--Whisper White, Coastal Cabana (retired); Pattern--2013-2015 DSP Stack/ Coastal Cabana (retired).  Stamps--Indescribable Gift (2016 Occasions).  Ink--Coastal Cabana (retired).  Punch: 2" Circle.  Sizzlit Die: Lots of Tags (retired).  Stash:  7/8" Satin Dot ribbon; Fancy Pearl.  Techniques: Braided-Edge (aka Basket Weave, aka Lattice Edge); Dahlia-Fold.  Size: 5-1/8" x 5-7/8".