A Beautiful Frosty Non-Traditional Colored Card!

My daughter-in-law loves purple.  Deciding which Christmas card to give her and my son was not a difficult choice that's for sure.  I made some Christmas card at a September 2019 card class, and this design by Luci Kirschbaum was one of the cards we could make.  The Feels Like Frost dsp patterns are so pretty and just stand alone without almost any embellishments or add-ons needed.

I loved Luci's design so much I decided to keep it pretty much as she presented, but I did add a Purple Posy mat layer and increased the size of the white card base to accommodate that addition.  This card was made by stamping the white card front with the snowflake grouping in the Frosted Foliage stamp set with the Purple Posy ink.  A 1-3/4" vertical panel of the Feels Like Frost dsp was adhered about 3/8" from the left side.  The sentiment was stamped with Basic Gray ink and die-cut with the ticket stub corner stitched die.  Snowflakes were added to the corners with Purple Posy ink.  The Purple Posy mat layer was added and Purple Posy die-cut snowflakes using the Snowfall Thinlit dies from the November 2019 Showcase Snowflake Promotional stamp and die sets. 

Take a peek at my finished card with my coordinated inside design and Christmas verse:

Ingredients:  Stampin' Up products:  Cardstocks--Whisper White, Purple Posy (2019-2021 In-Color).  Patterned dsp--Feels Like Frost (2019 Holiday).  Stamps--Frosted Foliage (2019 Holiday).  Dies--Frosted Frames (2019 Holiday); Snowfall Thinlits (November 2019 Snowflake Showcase Promotion).  Ink--Purple Posy (snowflake card front); Basic Gray (focal sentiment).  Rhinestones.  Other:  Recollections punch--Mini Snowflake.  WRMK Corner Chomper--Stub/Deco (style used--Stub).  Chatterbox verse.  Size:  4-3/4" x 6."

A Birthday with Lots of Technique!

My oldest daughter is celebrating her birthday today!  I've been working on her card for a couple of days trying to work out its design.  I knew only one thing for sure when I started, my daughter's favorite color is turquoise, so it would have turquoise in it somehow, somewhere.  A couple of other things I knew were that I wanted to enter the finished card into some Splitcoaststamper challenges, and if it could somehow fit one of my remaining three Round 8, Letters, I'd be pleased!

My usual plan, as most of you who read my blog might know by now, is that I check out all SCS challenges for inspiration and ideas before I begin, which I did with this card.  I am happy to say that with my mojo, which started with the SCS Inspiration Challenge, which led to my being able to enter into Alphabet Challenge, Round 8, and others!  

See "The Story" below my card for more details.  Meanwhile, take a peek at my daughter, Michele's, card below (plus the inside design and verse).  I am truly excited about her card, how it evolved, and how it turned out, and I think she will be thrilled!

Ingredients:  Stampin Up products:  Cardstock--Night of Navy, Tempting Turquoise, Basic Gray.  Patterned Paper: 2012-2013 DSP Stack--Brights/ Pacific Point (umbrella).  Stamp--Marbling (background).  Inks--So Saffron, Pear Pizzaz, Tempting Turquoise.  Stencil--Pattern Party Decorative Masks (clouds).  SU White Embossing Paste.  Glitter--Dazzling Diamonds.  Other products:  Cardstock--Recollections Pack/ Punchy Florals.  Colourcraft Brushos--Turquoise, Grey.  MFT Stencil--Raindrops.  Stamps/Dies--Crazy Birds; Crazy Things (bird/hat).  Savvy Dies--Cityscape; Small Space Needle.  Elizabeth Dies:  Rainy Day (umbrella).  EK Punch: Med. Victorian Corner.  Techniques: Coloring Texture Paste; Copic Coloring; Marbling; Glitter Texture.  Chatterbox sentiment/ verse (computer/ Xiomara font).  Size: 4-3/4" x 6".

THE STORY:

EVOLVING A CARD TO FIT NUMEROUS CHALLENGES

By now, a lot of you who are also on the Splitcoaststamper (SCS) site know that I love to find inspiration from several SCS challenges. You might wonder how I do this.  So here goes an explanation:

I keep a running computer document with all SCS challenges listed chronologically by weekdays and dates within each challenge, then the monthly, annual, etc. challenges follow.  I check each week and add the challenge updates as the week progresses.  If I actually enter a challenge, I place a red check mark in front of the challenge number.  It makes it pretty easy to spot what I've entered and what I haven't, plus checking to see what inspiration I can get to decide what I might want to do to my card to fit the challenges I decide to enter.  It is often a work in progress as I create, and I may add or subtract a challenge as I work and possibly make changes to my original plan.

Almost everything on this Crazy Bird card started first by browsing the June 23, 2018 Inspiration Challenge/ Hayneedle online site for art work with blues and greens as I knew for sure I wanted to use turquoise.  This Inspiration Challenge led to seven other challenges.

#1.  Inspiration Challenge - IC655 - 6/23/18.  In my browsing through Hayneedle, several blue and green three wall art items led me to my card design:  a marbled background, though eliminating the browns shown and adding pear pizzaz and soft yellow to the turquoise; 2) a silhouetted Seattle skyline; and an aqua raindrops canvas led me to add rain and clouds. . .after all, it will be a Seattle scene!

#2. Free for All - F4A432: Baby It's Cold Outside - 6/1/18.  Since I was going to use rain and it was to be Seattle, I decided to use embossing paste and add color and glitter to my rain and clouds to evoke a cool feel to the card.

#3. Ways to Use It - WT680: World Water Day - 3/22/18. . .with all this talk about rain in Seattle, I remember a older WT challenge that talked about rain and umbrellas that I missed because it was issued just a few days before being AWOL with my knee surgery.  I re-checked and sure enough the rain and an umbrella worked for this challenge.

#4. Alphabet Challenge, Round 8 - DD8ABC21U - 1/3/18.  Letter U = UMBRELLA. . .one of my final three missing letters for Round 8!!! The BONUS challenge for using a faux finish fit my plan for a marbled background mentioned above. I was stoked!! 

#5. Mix-Ability - MIX280: Losing My Marbles - 6/8/18.  Marbling led me to think of the mix-ability challenges.  I was sure there was bound to be something about marbling.  In my searched through this challenge and found this one, which gave suggestions on making a marbled background, but it also mentioned that a marbling stamp could be used.  I decided to possibly invent my own marbling by using my SU Marbling BG stamp.  To get three colors in my marbling, I used my MISTI and shifted my paper about 1/8" with each of three colors: So Saffron, Pear Pizzaz, and Tempting Turquoise and blew it dry to set the ink.  I watercolor brushed more turquoise ink as the final coat to add more turquoise and to fill in any white areas, and blew it dry.  Next, I "painted" the entire marbled surface with glitter glue and sprinkled Dazzling Diamonds all over, lightly brushed off excess glitter, and blew it dry.  It looked like a HOT MESS during the process, but I was pretty pleased with the final result.

#6. Colored Texture Paste Technique. I colored my White Embossing Paste and stirred in a bit of Dazzling Diamonds glitter and Brushos Turquoise to stencil on my raindrops and blew them dry.  I also mixed a batch of light grey with a few sprinkles of Brushos Grey and glitter to stencil on my clouds.

#7. Teapot Challenge - MMTPT515: TPT Tic Tac Toe - 6/5/18.  I'd been watching out for using this one, because I love Tic Tac Toe challenges.  My diagonal Tic Tac Toe is: Stitching, Die-Cuts, and Patterned Paper.  I also added Watercoloring and Embossing (if the Embossing applies to Embossing Paste rather than just dry embossing).  My umbrella is a die-cut, and it became covered in patterned paper with hand-stitching. My bg uses watercoloring and Embossing Paste in the raindrops and clouds.

8. USEIT2018 - ongoing :  My new but dusty and never stuff:  the Crazy Birds stamps and dies and my Small Space Needle die.  I bought both at least two years ago and had not used them yet!  Also both stencils are new and have been languishing in their packages.  My used oldie is my CityScape die, which I have not used for 2-1/2 years! 

So, there's the explanation of my development of a card utilizing numerous challenges. I find this great fun, and a challenge in and of itself for me! Usually I start with a bit of an idea from a challenge then embellish upon the idea to fit other challenges, but as I mentioned before its a work in progress and challenges to be entered can change as the card evolves.

Birthday Panda for a Young Niece!

My first niece on my side of the family will be having her eleventh birthday  in June.  I need to get a card made and off in the mail.  I bought a card kit from Stampin' Up, which I usually do not do, but I loved the papers and colors, which remind me of the colors in a challenge provided by Spiltcoaststampers.  The kit provides four card designs and materials to make four of each design.  I really did not want to have four cards all the same, so I've been venturing forth mixing and matching the kit materials, plus adding others to come up with my own designs.

My niece is right at that in-between age when she may or may not like fuzzy animals on her birthday cards, but with the help of some inspiration from a second Splitcoasterstampers challenge, I wanted to use a panda bear on her card.  I still LOVE panda bears, so I'm hoping she might enjoy them too!  For this card, I used materials from three of the kit's card designs, plus added some additional cardstock colors and a panda stamp as well.  Take a peek below at my cute little panda card...hope the recipient likes it!

Ingredients:  Stampin' Up products:  Cardstock--Whisper White, Old Olive, Flirty Flamingo.  Stamps--Perfect Pandas (2018 SAB).  Ink--Old Olive, Baked Brown Sugar (ink distressing).  Punch: Scallop Border (ret.).  Perennial Birthday Kit (2018 Occ):  materials from three different card designs: denim/ gold dsp, floral dsp + balloon die-cuts + Dapper Denim twine.  Other: Memento Tuxedo Black Ink; Spellbinder dies: Long Scallop Rectangles SM (modified).  Chatterbox verse. Size: 4-3/4" x 6".

A Birthday is Coming!

My son-in-law's birthday is just a few days after my youngest son's birthday.  The family has been celebrating them together, as it is becoming more and more difficult to carve out time when all of us are available at the same time, and my darling daughter-in-law has graciously offered to host a dual party for both of them!

I decided to case and modify a card I saw on Pinterest by Mary Fish using cardstock color strips, the large Stampin' Up "Happy Birthday" die, and a white baker's twine wrap and bow.   Because I wanted my card to lean more toward the masculine side, I decided to make my card horizontal and added more color strips, an Island Indigo (teal) color mat behind the strips on a white cardbase, and leave off the twine and bow.  I cut my "Happy Birthday" die using white glitter paper and used enamel dots that I colored to match my color strips and to change them from their pastel shades to darker shades.  Take a peek below at my finished card for Josh:

Ingredients:  Stampin' Up cardstock:  Whisper White, Island Indigo, Night of Navy, Fresh Fig, Blushing Bride, Berry Burst, Lemon-Lime Twist, Garden Green, Crushed Curry, White Glitter cs.  Stampin' Up die: Happy Birthday Thinlit.  EK punch: Vintage Medium Corner (double off-set layered).  SU Glitter Enamel Dots (Copic color modified).  Size: 4-3/4" x 6".  

My Oldest Son's Birthday is Coming!

My oldest son's birthday is in the early days of March, so I should have been thinking about making his card last week, but alas my calendar was cluttered.  When this happens, I have a difficult time getting myself to my craft table because my mojo has gone out the window, and I have the dickens of a time getting it back! 

Not to fear. . .I went to a cardmaking event hosted by the dynamic duo, Dar Peterson and Luci Kirschbaum, and as I viewed one of the inspiration cards, some ideas flew into my head that I thought would be great additions to an already very cute card (thanks to Luci Kirschbaum).  I decided to complete only a portion of my card and take the pieces home to finish.  Now, I'm thinking it's time to finish it, because it will make the perfect birthday card for my son.

To the original design, I added embossing to the white background layer.  I thought that would be a nice touch, and I knew I had just the right embossing folder for this job!  Then, I decided I wanted to stagger my green color panel instead of stacking all three panels one on top of another.  The embossing texture turned out especially nice...I just LOVE that "Happy Birthday" embossing folder!

Now, I was ready to finalize my card by creating an inside design and verse that was complimentary to the card front design and for the birthday occasion.  Take a peek at the finished product below.

Ingredients:   Stampin' Up products:  Cardstocks--Emerald Envy, Crushed Curry, Tangerine Tango, and Whisper White.  Ink--Basic Black; Emerald Envy.  Ribbon--Emerald Envy 3/8" Ruched.  SU-2017 Occasions:  Pattern dsp--Party Animal (2017 Occasions).  Stamps--That's the Tag.  Dies--Timeless Tags Thinlits.  Other:  Cuttlebug EF: Happy Birthday.  EK punch: Zig Zag.  Computer verse.  Size: 4-1/4" x 5-1/2."  (a CASE card...thanks Luci Kirschbaum for original inspiration).