A Shower of Wishes for Your Birthday!

 I needed another February birthday card for a cardmaking friend. In looking over my Splitcoaststamper Challenge Catch-up List, I decided I needed to make a card that had something to do with rain showers and umbrellas.  I pulled out an old but never used die by Elizabeth Craft Designs, Rainy Day, and I began to create my design with this umbrella in mind.  

I thought it would be fun to dress up my umbrella card front by using the Basket Weave edging technique.  It is a technique that looks difficult and classy when complete, but is actually quite easy to do.  I've used it on five or six cards in the past, but the last time was way back in 2018!  It's definitely time to dust it off and use it again!

I've finished my card with my design evolving as I sorted through and chose multiple SCS challenges to include.  I think my cardmaking buddy will enjoy her birthday card!  Take a peek below:

Ingredients:  SU Cardstock--Coastal Cabana, Calypso Coral, Basic White. Elizabeth Craft die--Rainy Day. SU Embossing Folder--Perfect Polka Dots (retired). EK Punch--Victorian Corners. K&Co. Butterfly Stickers. SU Rhinestones. SU Glitter--Dazzling Diamonds. Stash--1/4" satin ribbon (Copic colored-R14). SU sequins--Iridescent Sequins-Asst. Wink of Stella/Clear (umbrella & inside corners). Technique--Basket Weave (aka Braided Edge; aka Lattice Edge). Chatterbox sentiment/verse. Size--4-3/4" x 6".

February Birthday Happiness!

 I have another friend and cardmaking buddy whose birthday is in mid-February, so yet another birthday card is needed.  I was in the mood for flowers, so I thought I'd look for a Splitcoaststamper Inspiration Challenge to get me started.

While in my E - F stamp set boxes back in January, I ran across a wonderful flower stamp set, Field Flowers, that I had used for its flourish in the past but not the flower.  I pulled it just in case I found that I could use it in the near future and here was my chance.  After finding the SCS Inspiration Challenge, I was delighted to know that this stamp set would work, but I would be able to add other challenges if I added butterflies and glitter as well.  Take a look at the finished card inside and out below:

Ingredients: SU Cardstock--Sahara Sand; Retired: Always Artichoke, Lucky Limeaide, Tempting Turquoise. Stamps (retired)--Field Flowers, Elements of Style. Dies--Sizzlits Embosslit/ Beautiful Wings. Inks--Sahara Sand (over-the-edge stamping/ distressing), Old Olive (distress L. Limeaide cs), Early Espresso (distress T. Turquoise).  SU White Embossing Powder.  SU Dazzling Diamonds glitter. 3/8" Stitched Satin Ribbon--Gumball Green. Punch (retired)--Scallop Trim Border.

Love of Chocolate & Friends

I needed a little friendship appreciation card for someone who is always helpful, kind, and makes my life easier whenever she can!  I always have it in the back of my mind to use old stuff in my stash whenever I can probably because of the Splitcoaststampers' Use It Challenge, which requires just that...bring out the dusty old stuff and use it!   Read on to find out why that's just what I did for this card.

My friend and I have a love of chocolate, plus we are both involved in Stampin' Up products and cardmaking.  Thinking about chocolate, brought to mind a stamp set from way back when...2011 as it turns out!  Pulling out these old stamps led to using other old and retired items as well!  Take a peek below at the inside and outside of the finished already mailed and on its way!

Ingredients:  SU Cardstock--Crumb Cake, Chocolate Chip & Pretty in Pink (retired).  Ink: Early Espresso, Soft Suede (ink distress).  Retired SU products: Stamps--Eat Chocolate (2011 Occ.-retired); Decorative Label punch; Polka Dots Embossing Folder; 1/4" Grosgrain ribbon (stash).  Zutter Corner Rounder punch.  Size: 3" x 6" Mini Slimline.

A Little Happy Birthday to Sister-in-Law #3

 This is my Sister-in-Law #3 birthday card needed in early July. This was a series of alternative card designs I made from the SU 2019 Made to Bloom card kit.  For this card, I used patterned paper, floral pieces, ink, and the sentiment stamp from the kit.  

I added a Poppy Parade cardbase and a gold foil layer.  I also die-cut a gold foil frame from two different die sets and combined them for a new look.  One is a stitched inverted scallop framing die and the other a stitched oval that I encased around the stitched-scalloped frame, making it double stitched.  I love stretching my materials to make something new!  I also fussy cut the two oval floral wreaths removing the two smaller bouquets to place around my gold framing.  I added some Acrylic Glitter Glaze to the floral centers for some added sparkle, plus some scattered gold gem dots.  I'm pretty pleased with the results.

Next, I worked on the inside, making up a computer verse and printing it in a purple shade to match the Blackberry Bliss ink on the front sentiment.  I added a matching patterned paper used on the front, the verse, and some gold foil punched corners with little floral rhinestones.  Take a peek below at the finished inside and out:

Ingredients: Stampin' Up products: Cardstocks--Whisper White, Poppy Parade. Made in Bloom kit (2019)--pattern paper, floral pieces sentiment stamp.  Ink--Blackberry Bliss. Gilded Gems--gold.  Other: Recollections Gold Foil. MFT dies--Stitched Oval Scalloped Frame, Stitched Ovals. Sargent Art Acrylic Glitter Glaze.  Inside: EK--Victorian Corner punch. Busy Kids Camp--Floral Rhinestones. Chatterbox computer verse.  Size: 4-3/4 x 6-inches.

June Brings a Birthday for Sister-in-Law#2

As mentioned in the past, I have eight sister-in-laws...most from my husband's side of the family.  I keep track of them by numbers based on their birth date in chronological order.  The first sister-in-law birthday of each year is my brother's wife in May, and she is sister-in-law #1.  For June, we celebrate sister-in-law #2 and her birthday is coming soon.  Once again, I decided to use the Made to Bloom kit, making my own design.

From the kit, I used the calypso coral patterned paper, the pink scalloped panel, and part of the floral wreath.  I fussy-cut an arc of flowers off the wreath to use on the sentiment focal oval.  The cardstocks, die, stamp, embellishments, and glitter glaze were all additions I added to make my design alternative.   I used the glitter glaze on the flower centers to add a bit of shine.

It's fun to use kits in ways not provided and see what you can come up with yourself other than the designs provided.  Take a look below at my finished card inside and out for sister-in-law #2.  I think she will like it!

Ingredients:  Stampin' Up products:  Cardstocks--Whisper White, Pretty-in-Pink (ret.).  Made in Bloom kit (2019):  patterned paper layers, floral piece.  Ink--Blackberry Bliss.  Ribbon--1/4" White Crinkled Seam Binding.  Sequins--Artistry in Bloom.  Other: Stamps--Penny Black-Sweet Wishes.  Dies--Spellbinders Floral Ovals; Lawn Fawn Fancy Scallop Rectangle.  EK Punch--Scalloped Corners (inside).  Sargent Art Acrylic Glitter Glaze.  Chatterbox computer verse.  Size: 4-3/4 x 6-inches.

A Wondrous Gift is Given

More Christmas cards are needed for my 2021 Christmas stash.  This is a remake of a card made back in 2009, using the now retired Stampin' Up Lovely As A Tree stamp set that was so popular and remained current from 2001 to 2019!  My new card has more layers added, including some sparkly silver glimmer paper, Dazzling Diamonds glitter, and sequins that the original did not have.  

I just love the technique of layering trees in navy ink and silver embossing with a little added Dazzling Diamonds glitter into the mix.  Unfortunately, the photo does not pick up on the glitter added, but it is quite sparkly in RIL!  I've also added some sparkly sequins scattered about.  Take a peek at an update of an old card below:

Ingredients:  Stampin' Up products:  Cardstocks--Whisper White, Night of Navy, Silver Glimmer.  Stamps--Lovely As A Tree (ret. 2001-19), Wondrous Gift (ret. 2007-09), Snow Front (2019).  Ink--Night of Navy, Versamark.  Embossing Powder--Silver, Heat & Stick.  Glitter--Dazzling Diamonds.  Ribbon--1/4" Night of Navy Grosgrain; Silver Cording.  Size:  5 x 6-1/4 inch.

Season's Greetings in a Z-Fold Card

I'm onto my fourth card using Liz Thayer's November Totally Lovin' Christmas card kit remodels.  I have to say, I totally loved this card with the Z-Fold and frosted Christmas tree; therefore, I only made a few changes.

For my card, I cut my pieces larger than the original design, and I changed the sentiment, the tree topper to a gold star (from an enamel dot), and filled the inside with a full plaid panel.  As the original had no inside design, I added my own verse stamp and layout design to hide behind the Christmas tree panel.  I changed how the plaid was used behind the frosted tree.  I decided to add a small rectangle of plaid paper behind the see-through frosted tree and then fully cover the panel back with a piece of red cardstock to match the cardbase.

The technique to make the frosted Christmas tree is simple and lots of fun.  I punched out the tree on the white cardstock.  I placed a large rectangle of clear packing tape over the tree hole with the sticky side to the card front.  The next step is to liberally sprinkle fine iridescent glitter onto the sticky tape and tap off the excess onto a piece of clean paper to allow you to return the unused glitter back to its jar.  Top your tree with a tree topper...in my case, I used a gold star punched from gold foil cardstock.

Ingredients:  Stampin' Up products:  Cardstocks--Real Red, Whisper White, Gold Foil.  Patterned paper--Wrapped in Plaid 6x6 Pack (2019 Holiday).  Stamps (2019 Holiday)--Frosted Foliage (Queen Anne's Lace BG stamping); Peaceful Boughs (sentiment/ inside verse).  Ink--Garden Green.  Punch--Pine Tree (Perfectly Plaid--2019 Holiday).  3/8" Shaded Spruce/Gold Stripe ribbon (2019 Holiday).  Other:  EK Punch:  Victorian Corners.  Size:  4-1/2 x 6-1/4 inches).

Christmas Wrapped in Holiday Spirit!

I'm onto my third Totally Lovin' Christmas modification...a cute little present snowman.  This one was a bit too plain for me, and the Soft Sea Foam green didn't do much for me with the blue.  I put my re-designing thinking cap on, and my soft green became a pinked white glitter paper center panel, my little snowman got a lot of fussy-cutting, and he changed his hat color too.   I decided he needed a navy cardbase with a silver foil mat layer between the Seaside Spray front panel, which surely need a bit of snowflake embossing to bring out some lovely texture.  My sentiment needed a pick-me up with a navy matting to coordinate with the new cardbase color.

I kept the layout with modifications, added new papers, dry emboss texturing, some glitter, foil, and a popped up fussy-cut snowman...it's done, and I am pleased.  This card surely must go to my snowman-loving friend! 

Meanwhile, when I saw the "square" snowman, I was thinking about a Splitcoaststamper challenge I was sure I'd seen requiring using things with squares.  My geometric snowman would surely fit!  Take a peek at the finished card below, both inside and out.

Ingredients:  Stampin' Up products:  Cardstock--Night of Navy, Balmy Blue, Silver Foil, Whisper White.  Stamp: Lots of Cheer (snowman/ sentiment).  Dies: Finishing Touches Edger (pinked).  Embossing Folder: Snow Burst (2011 Holiday).  1/4" Metallic Seaside Spray ribbon (2019 Holiday).  Other:  Colorbox Glitter paper--Fresh Snow.  Inks--Memento Tuxedo Black.   Colorbox Charcoal Cat Eye (ink distressing).  Punch--EK Victorian Corners.  Copic markers--Snowman/ B000, B21, B32, O; Hat/ B91, B95, B97; Ribbon/ R00, RV23, R83.  Scarf/ YG13.  Carrot/ YR18.  Wink of Stella-Clear (ribbons).  Size: 4-3/4 x 6 inches.   (Thanks to Liz Thayer for original design idea that I took the liberty of modifying).

Joyful Season

Here's another redesigned Christmas card from Liz's November Totally Lovin' Christmas.  I did quite a bit of rearranging, adding and subtracting, basically changing the card design almost entirely.  I used the original stamped wreath image, but colored it with my Copic markers, and the red glitter strip with the bell, though I moved the bell upward about an inch.   I made the wreath panel into a 2-1/2-inch square rather than a 3-inch rectangle and repositioned it near the top rather than at the bottom.  I did leave the red glitter mat layer beneath.
.
I enlarged my card to an A6 size by adding a new cardbase layer, and added festive patterned Christmas paper for the top front layer.  I added Clear heat embossing to this paper to give it some sheen.  The patterned paper really perked up the card and brought it to life.  I chose a new and larger sentiment stamped on the same green as the cardbase and added it to a red glitter mat layer shaped with a decorative die.  I popped both the wreath and the sentiment up off the patterned paper front.

I am delighted with the finished look and like all the additional sparkle and sheen.  I then created a decorative inside design to coordinated with the outside.  Take a peek below at the finished card inside and out!

Ingredients:  Stampin' Up products:  Cardstock--Whisper White, Pear Pizzazz, Red Glimmer paper.  Stamps--Lots of Cheer (wreath/ sentiment).  Dies--Labels Collection.  Linen Thread. Mini Jingle Bells (2019 Holiday).  Other:  Patterned paper--Candy Candy/ Holly Stripe/ unknown.  Zutter corner punch.  Copic markers--Wreath Bells--G40, G21, YG68, G07; Ribbon--R01, R32, R37, R39 (lots of blending).  Wink of Stella Glitter Pen--Clear.  Chatterbox verse.  Size: 4-1/2 x 6-1/4.

Bright Green, Navy, & Lemon Lime for a Birthday!

A friend has a birthday just a few days before Valentine's Day.  I found I can do a bit of cardmaking after my hand surgery...one-handed as long as I take it slow since it isn't my predominate hand.  I can hold things still with the weight of the cast as long as I do not put any pressure on it and keep it in a relaxed state.  So, I may get a few cards done if I'm lucky without causing undo pain.

I've had this pretty patterned Stampin' Up paper called Naturally Eclectic for about a year, and I thought I'd use it along with the companion stamp set.  I focused on the two-step stamped flower and double stamped it twice, and then fussy-cutting one to pop and layer over the other on its small rectangular flower panel.  To finish it, I mat-framed it with a postage stamp edged die, and I used its larger size to mat-frame my patterned background paper.  The card fell together fairly easily, except for the modification I had to make for my smaller postage mat-frame to fit the size I wanted my stamped flower panel to be.

I designed the inside to match elements found on the card front and composed a little birthday verse for my friend.  Take a peek below at the finished design.

Ingredients:  SU Products:  Cardstock--Whisper White, Night of Navy, Emerald Envy.  Pattern--Naturally Eclectic.  Stamps--Oh So Eclectic; Sweet Cupcake (sentiment).  Ink--Lemon Lime; Emerald Envy.  Punch--Classic Label.  Ribbon--1/2" Finely Woven-Lemon Lime.  Die--Avery Elle Postage Stamp Rectangles (smaller modified).  Darice Pearl Stickers--4 cm + seedlings.  Chatterbox verse.  Size: 4-3/4 x 6".

Congrats! to Your Happy News!

We are looking forward to welcoming a new bundle of joy into the family. . .our second grandchild!  She is due to arrive in mid-March next year!  This will be my youngest daughter's first child.  She is so excited as are my husband and me.  Our daughter announced that they were expecting a girl by texting a picture of hubby giving her a big hug as she displayed a lovely pink satin bow tied around the middle of her white shirt as she held fluffy pink teddy bear in the crook of her arm.  It gave me a great idea for a congratulations card!

First, I prepared two pink watercolor papers. . .one for the card face and one for the inside verse area.  I dried them with my heat embossing tool, making sure not to curl or warp the paper (by applying heat to both sides of the paper).  I spritzed both with water to get a water droplet effect and re-dried both.  Then, I flecked darker rose watercolor paint flecks onto their surfaces with a paint brush.  Next, I stamped and fussy-cut my little bear and colored and shaded him very lightly with several pink Copics.  I shimmered the bee's wings with Wink of Stella/ Clear.

It was time to prepare my quilt.  I cut my quilt twice with the quilt die:  once in white cardstock and a second time in the tiny white hearts on pink paper.  I assembled the die-cut quilt pattern pieces that I chose to use to make up the quilt pattern from the die-cut pieces and glued them onto a square of plain white cardstock, starting with the pink patterned frame.  When assembly and gluing was complete, I embossed it with the Quilt Top embossing folder and glued it to my Lifestyles Eyelet Squares die-cut.  

I die-cut "Congrats" four times in plain white cardstock and stacked and glued them on top of one another to give dimension.  I added Wink of Stella/ Clear shimmer to the eyelet square edging and the "Congrats" die-cut.  Unfortunately, this does not show up in the photograph.  I popped my quilt square and little bear off the watercolor wash background with foam dimension pieces cut to fit just inside their outside edges.  I finished the card with the velvet rose ribbon and knot (which looks darker than in RIL) and with a yarn tuff in the quilt center.

Take a peek below at my finished baby congratulations card for my youngest daughter!

Ingredients:  Papers:  Stampin' Up Whisper White cardstock, My Favorite Things Tiny Hearts Brights (pink), Tim Holtz Watercolor Paper.  Stamps: Stampin' Up A Little Wild.  Dies: Stampin Up Quilt Builder, WRMK Lifestyles: Nesting Eyelet Squares (may be discontinued), Impression Obsession: Congrats.  Stampin' Up Embossing Folder: Quilt Top.  Wink of Stella: Clear (eyelet square/ congrats).

Pssst. . .Missed It!

Sister-in-law #4, one of my husband's sisters, had a birthday toward the end of July.  It totally snuck up on me and slipped on by before it even came to mind.  It took me almost an entire month to remember and that was only because her sister's came in August.  That's when I rememeber I had forgotten to make a card for the sister in July!  Of course, had I looked at my Cardmaking Date calendar this would not have happened, but I think our extremely hot summer has fried my brain!  So, I really needed to get to work fast!

I thought I would do a sweet little belated card with a bit of humor and use a gumdrop stamp that I borrowed from a friend.  My gumdrops would come in a myriad of colors in all shades of the rainbow with a little gold glitter to give them a bit of sparkle.  I used several mat layers all in different colors to coordinate with my colored gumdrops.  I popped a little hexagon tag with a sentiment "pssst. . .missed it" and tweaked the tag with a little red glittery heart just because I thought it needed a little embellishment to perk it up.

I finished my gumdrop card front and also the inside design with a little belated birthday apology verse, and it's ready for the mail.  Take a peel below. . .it's pretty "sweet!"

Ingredients:  Stampin' Up products:  Cardstock-Crushed Curry, Lemon-Lime Twist, Real Red, Tangerine Tango, Whisper White; 2011-2012 DSP Paper Stack (Bashful Blue Dots).  Stamps:  Goody Goody Gumdrops.  Spellbinders Dies: Venise Lace Rectangles; Octagon Classic Nestabilities; Octagon Scallop Nestabilities.  Copic Markers.  Stash: Gold Iridescent Glitter; Gold Rhinestones; 3/8" Offray Plaid Stitched ribbon; Horizon Friendship Thread (Harlequin).  Chatterbox sentiment/ verse.  Size: 6" x 4-3/4".  

Thinking of You, Friend!

I have several Thinking of You cards that I need to make and get in the mail, yesterday!  One is for a friend who always have me over for tea when visiting in her seaside town.  I saw a challenge where we were to make a card around a song, and as soon as this, I thought about her and the song, I'm a Little Teapot, came to mind, and I couldn't get it out of my head.  With tea in mind, a search through my To Do box and brought forth pieces of an unfinished card that I started in a class about 4-1/2 years ago.  

Yes, I love to go to classes and socialize, and I usually don't get all the design samples completed.  To give me some credit (rolling my eyes), sometimes that is deliberate, because an idea comes to mind where I want to change something little or big about the card.  I don't complete the card at class in order to make the changes at home with my own supplies.  This one, I have kept near the original design, but made the original Melon Mambo card base into a layer.  I re-sized most pieces smaller, plus I added two more layers. . .a white cardbase and a die-cut decorative Old Olive layer.  I also popped up all the layers above the Old Olive layer from those first two added layers.  As a finishing touch, I ink distressed all my edges for a bit of a vintage flair, but I see this does show up well in my picture.

I think my friend will like her card, with its little teacup and happy colors, and be pleased to know I've been thinking about her.  Take a peek below at my finished card inside and out.

Recipe:  Stampin' Up products:  Cardstock--Old Olive, Melon Mambo, Whisper White.  Patterned dsp:  Gingham Garden (2013 AC).  Stamps: Kind & Cozy (2013-14 AC).  Ink: Old Olive, Melon Mambo; Ink Distressed: Soft Suede.  Punches: 2-1/4" Scallop, 2-3/8" Circle. Scallop Trim Border (ret.).  Embossing Folder: Stripes (ret.).  Ribbon: 3/8" Old Olive Striped Organdy. Rhinestones.  EK Punch: Scallop Photo Corners.  Die:  Reverse Confetti Die: Lacy Scallop Frame.  Fussy-cut teacup.  Chatterbox verse.  Size:  4-1/2" x 5-3/4".

Hugs & Prayers for SCS Friend. . .

A wonderful Splitcoaststamper friend has lost her young, great niece, and I wanted to join the Teapot Party to let her know we are so sorry for her family's loss.  To lose someone is always difficult, but that much more so when they are very young!  I am sending our friend hugs and prayers in a card, sealed with a kiss.

I have had this fantastic stamp set that I know it has flooded Splitcoasterstampers and Pinterest with oodles of card, but I have never inked it up myself.  I thought this lovely tree and scenery would be just right for a sympathy card.  I'm hoping it bring comfort to our SCS friend.  Time will eventually help heal and allow her and her family to remember wonderful memories of this sweet little girl who has gone too early to a peaceful and loving place.  Take a peek below at my finished card inside and out.

Ingredients:  Stampin' Up Products:  Cardstocks--Blushing Bride, Lucky Limeaide (ret.), Chocolate Chip, Very Vanilla; Stamps--Sheltering Tree; Inks--Chocolate Chip, Pear Pizzaz, Strawberry Slush, Pink Pirouette, Memento Tuxedo Black, Burnt Brown Sugar (ink edge distressing); Embossing Folder--Petal Pair (2018 Occ); 1/2" Pink Pirouette seam binding ribbon (ret.).  Other:  Stash--Metal Leaf; Chatterbox sentiment/ verse (computer printed); Size--4-3/4" x 6".

A "So Sweet" Valentine for Hubby!

I decided I should finish a card that was demontrated in a card class hosted by Stampin' Up demonstrator Liz Thayer a few years ago.  Its parts have been languishing in my "To Do" box for quite awhile.  Of course, I have to tinker a little to make the card a bit more my own.  

I added a black cardbase to add more layers and because I thought a black and red edging would look ever so much more striking than just red, plus I widened my layered edges to be more like a frame.  I re-arranged my heart colors a bit, plus added rhinestones to the curlicues on the sentiment.  The inside to tie-in with the front is entirely my own design, including the created verse, which I used on all my Valentines this year.  I used to do a different verse on every seasonal card. . . finally the lightbulb went on after feeling way overburdened.  "Why do that,"  I said to self. . .so obviously I stopped!

I plan to enter this into the SCS Alphabet Challenge for Letter S...no double challenge for me on this...I just couldn't quite see a hot glue design that would in any way enhance the look of my card...LOL!  Hot glue reminds me of buggers to be quite blunt and honest!  Didn't think hubby would appreciate that!  Although, one clever lady wound yarn around her glue ball as her focal point was all about cats. . .that glue ball did work well!  

I found a few other challenges it might fit into as well.  Now it's time to take a peek at hubby's finished card inside and out below:

Ingredients:  Stampin' Up papers:  Cardstock--Basic Black, Real Red, Whisper White; Pattern--*Stacked with Love Pad.  SU stamp: *You Plus Me.  SU Ink: Real Red.  SU Punch:** Sweetheart; **Itty Bitty Accent Punches--Heart.  **1/8" Taffeta Silver Edge ribbon: Red and Black. SU catalogs: *2015 Occasions/ retired.  **2014-2015 Annual/ retired.  SU Rhinestones.  Created Verse.  Size: 4-5/8" x 5-7/8". 

X is for XOXO Valentine!

Another two Valentines to design, of which I plan to make two. . .one for son and his wife and one for youngest daughter and her husband.  This one will focus on meeting the Alphabet Challenge, Round 8 "Letter X". . ."X" = XOXO!  I am using an old stamp to get XOXO onto my card to meeting the Letter "X" challenge, and I decided early on not to try for the double challenge of C for collage, as it seemed to me it would have to lean toward vintage to achieve a collage look.

Based on the WORD Challenge for "TEMP" in the new February Dirty Dozen Monthly Themes, I must use items on my card that start with each letter of the word TEMP.  My already planned stamped sentiment will be the printed word XOXO.  I will use a background stamp that is retired name En Francaise (retired) for my letter E.  My letter M will be the hot pink color I plan to use with  black and white as well...Melon Mambo, and the P will be the punches that I will use.

The third challenge is the 2018 Use It challenge to use materials and tools that have not been used in a long while and never used.  This will be no problem for me, as I have challenged myself to use all already-on-hand materials and tools and to bring out those gathering dust for this year's session in Valentine cardmaking!  Everything is old, as it turns out...perfect for this last challenge!  Take a peek at the finished card inside and out.  I think my children and their spouses will like their Valentine card!

Ingredients:  Stampin' Up Cardstocks:  Whisper White, Basic Black, Melon Mambo, Silver Glimmer.   SU Stamps (retired): En Francaise (background stamp), Oh, Goodie! (XOXO-2013 Occ), You Plus Me (heart-2015 Occ), Oh, Hello (inside corners chevron pattern-2013 Occ).  Ink: SU-Melon Mambo; Memento-Tuxedo Black.  Die: Nellie Snellen--Dots Circle.  Punches: SU--1-3/4" Circle, 1" Circle, Itty Bitty Accents-Heart (retired); EK Medium Scallop Corner.  SU-3/4" Black Chevron (retired).  Created verse.  Size: 4-7/8" x 6".  

Note: I have borrowed a several years old design by Liz Thayer that I made at a card class she hosted.  I've added layers, lowered by area of background stamping, changed my ribbon knot to right side, enlarged my circle focal point and added a die-cut bottom layer. 

Bloomin' Love & Happy Hearts!

I went to a cardmaking gathering hosted by my Stampin' Up upline, Liz Thayer, where she provided us with three card designs to make as a make-n-take.  It was a fun gathering of just six ladies who made the hour trip south to visit Liz and see her new home that they purchased about six months ago now.  We, of course, each brought a dish of food and Liz provided the beverages.  What a fun way to spend the afternoon.

One of the cards we made was a Valentine card using the new Stampin' Up Bloomin' Love stamp set, with lots of lovely popped layers to which I decided to add a white cardbase as another layer.  This card's colors are soft and elegant and the bottom Crumb Cake layer is texture embossed with the Happy Hearts embossing folder, which adds to the wonderful three-dimensional aspects of the card.  Thank you Liz Thayer for this lovely design. . .it was great fun to make! 

Now on to finishing the inside of the card so that it is ready to send off to someone special for Valentine's Day.  I brought the soft and elegant colors into the inside and embossed my Crumb Cake layer with the same Happy Hearts embossing folder as the front.  I printed my verse onto the Blushing Bride pink layer and added the My Valentine stamp from the Bloomin' Love stamp set.  I finished off the corners with a little embellishment and it was ready to go.

Recipe:  Stampin' Up papers:  Cardstocks--Whisper White, Crumb Cake, Blushing Bride, Dazzling Diamonds Glimmer; Love Blossoms dsp stack (2016 Occ.).  Stamps--Bloomin' Love (2016 Occ.).   Ink--Crumb Cake, Blushing Bride, Rose Red (inside).  Embossing Folder--Happy Hearts.   Love Blossoms Embellishment Kit (2016 Occ.).  Punch--EK Scroll & Hearts Edger.  Pearls.  Computer-made verse.  Size--4-1/2" x 5-3/4".

Thank You. . .Hydrangeas...What a Lovely Gift!

While vacationing in Seaside, Oregon for my birthday at my daughter's beach house, Michele's sister-in-law brought over a lovely bouquet of the largest, darkest purple and darkest blue hydrangeas I have ever seen.  Now, if you don't know, hydrangeas are one of my favorite flowers since I was a little girl, because they flourish in my hometown of Eureka, California.  These flowers just love that cool coastal weather found in both Eureka and Seaside!  I had to find a way to bring them home so that I could continue to enjoy them some more.

I wanted to thank Julie and her family by making and sending a little thank you card for remembering me with this special gift.  I thought I would share her thank you card with my blog readers.  I decided to pull out some of my older Stampin' Up products that I haven't used in a while because I just love this stamp set and this patterned dsp paper.  Julie's card is a circle-shaped card, made with the largest Spellbinder Classic Scallop and plain dies, but the rest of the card uses Stampin' Up products. 

Next is a quick peek at the card's inside.  The leaf is done with the Gently Falling stamp set, which has outline stamps and inside filler stamps.  By over-stamping, you can put the two together to look like my leaf.

Recipe:  Stampin' Up paper: Cardstocks - Soft Suede, Crumb Cake, More Mustard, Very Vanilla; Pattern dsp - Spice Cake (retired).  Stampin' Up stamps: Gently Falling (retired).  Stampin' Up Inks: Soft Suede, More Mustard.  Stampin' Up pumches - Modern Label (retired), Word Window.  Stampin' Up: Pool Party 3/8" Ruffled ribbon.  Spellbinder dies: Scallop Circle/ Plain Circle Computer-made sentiment and inside verse.  Font: Abbeyline/ Cheddar Cheese BTN (BIG).  Size: 4-1/2" diameter.

My "Old" Boss Celebrates His May Birthday!

My last boss before retirement, and principal of the elementary school where I worked as the office manager, is having his birthday in May.  I wanted to make him a card to send my birthday wishes and to let him see what I've been doing with myself since I retired.  Cardmaking is a hobby I started a few years after retirement with the encouragement of my sister and mentor, Heidi Gonzales (mylilscrapcorner.blogspot.com).  It has been a lot of fun, creating new and wonderful friendship, and something that I really enjoy doing as well.  It is so much fun to share my creations with family and friends.

You will note that this card sports a mustache, and, of course, you guessed it right, he has a mustache so I just had to make a card using my brand new Bow & Mustache EK punch.  This is actually the second card I have made with a mustache...such a cute idea.  My first card was for my brother-in-law's birthday and is posted back in January.  It was done using the Stampin' Up Bird Builder punch...a different look, but works well too.  But, I love this new quick and easy punch with the curly mustache ends.  I hope my friend and ex-boss likes his card as well as I enjoyed creating it for him.

 (Card inspired by a Liz Thayer design and modified by me.)

Recipe:  Stampin' Up papers:  Basic Black cs (base/ mat layer), Soft Suede (mat layer), Naturals cs, Neutrals dsp stack, Modern Medley dsp.  Creative Imaginations: Paint It w/Luminarte (brown word mat layer).  SU stamp: See Ya Later (modified).  EK punches: Bow & Mustache, Fancy Corners (inside). Inks: Memento Black, SU Soft Suede (distressing).  SU Chevron ribbon, pearls. 

A Niece-in-Law's Birthday

I missed a birthday for one of my niece-in-law's birthdays while getting ready for my California trip, Easter cards, and several birthday's in Washington before I left.  Since it was going to be late without time to prepare the card's verse or finish inside embellishments, I decided to use a card ready from my already-made stash, and do the finishing touches after arriving in California where she lives.  

This card's original design idea was by Liz Thayer, with my own personal modifications.  I enlarged my card, added several background layers, changed the stamped image, added a Spellbinders' Deckled Rectangles die-cut behind the image, and added the green pearls.  I composed the inside verse and added embellishments to coordinate with the front image.  I hope Danielle will enjoy her belated birthday card.

Recipe:  SU Paper: Whisper White cs, Rich Razzleberry cs, Old Olive cs, Sycamore Street dsp (2013 SAB).  SU Products: Patterned Occasions stamps, Rich Razzleberry ink (oval distressing), Delicate Details Lace Tape (halved), Lacy Brocade Embossing Folder, Designer Frames Embossing Folder (oval), 3/8” Striped Organdy ribbon (Old Olive). Spellbinder dies: Ovals SM, Deckled Rectangles SM.  Queen&Co.: Olive half-pearls.  Inside - EK punches: Daisy Scallop edger, Scallop Photo corners.